3
7. Operation Controls and Functions
7.1 Front Panel
Transmitter
Receiver
IR1 Extender
RS232 Out
IR2 Blaster
HDMI Out
①
②
③
⑤
IR2 Extender
RS232 In
IR1 Blaster
HDMI In
③
④
②
①
①.
RS-232 In/Out: Thess slots are to connect with 3.5O phone jack RS-232
cable from PC/NB equipment for sending RS-232 commands.
②.
IR Extender 1/2: This slot is to connect with the IR receiver cable included
in the package for IR signal receiving.
③.
IR Blaster 1/2: This slot is to connect with the IR blaster cableincluded in the
package for IR signal transmitting.
④.
HDMI In: This slot is to connect with HDMI source equipment such as DVD/
Blue-Ray player.
⑤.
HDMI Out: This slot is to connect with HDMI TV/monitor for display HDMI
input source signal.
7.2 Rear Panel
Transmitter
Receiver
CAT 5e /6 In
Power
DC 5V
① ②
③
CAT 5e /6 Out
Power
DC 5V
③
②
①
①.
DC 5V: These slots are where you plug the 5V DC power supply into the
unit and connect the adaptor to an AC outlet.
②.
Power LED: This green LED will illuminate when the device is attached
with power supply.
③.
CAT5e/6 Out/IN: These slots are to be connected with a single CAT5e/6
cable for data transmitting.