CYP CH-331H-TX, Operation Manual, Page: 30 / 44

25
COMMAND
Description and Parameters
set_vw_pos N1 N2 {N3}

Set the display’s position within the video wall. (Cannot exceed
the video wall’s horizontal and vertical display count.)
N1 = 0 ~ 15 [Row]
N2 = 0 ~ 15 [Column]
N3 = 0 ~ 255 [Target Receiver {Optional}]
Note: The Target Receiver number can be obtained by turning
on the Video Wall OSD. Omitting N3 makes the settings global to
all Receivers.
set_vw_bc N1 N2 N3 N4 {N5}

Set the video wall display’s bezel compensation values.
N1 = 0 ~ 99999 [Video width]
N2 = 0 ~ 99999 [Total display width]
N3 = 0 ~ 99999 [Video height]
N4 = 0 ~ 99999 [Total display height]
N5 = 0 ~ 255 [Target Receiver {Optional}]
Note: The Target Receiver number can be obtained by turning
on the Video Wall OSD. Omitting N5 makes the settings global to
all Receivers.
set_vw_hscale N1 {N2}

Set the video wall display’s horizontal zoom amount.
N1 = 0 ~ 99999 [Zoom amount in 1 pixel units]
N2 = 0 ~ 255 [Target Receiver {Optional}]
Note: The Target Receiver number can be obtained by turning
on the Video Wall OSD. Omitting N2 makes the setting global to
all Receivers.