CYP CH-331H-TX, Operation Manual, Page: 22 / 44

17
6.5.4 Functions Tab
The Functions tab provides control over the Transmitter’s maximum
streaming bitrate, maximum frame rate, as well as serial control
extension configuration. Changes made to these settings typically
require a reboot of the unit. After clicking on “Apply” please follow the
reboot instructions in the WebGUI, if necessary.
1) Video over IP: This section allows control over critical functions
of the Transmitter such as controlling the streaming bit rate and
quality.
■ Maximum Bit Rate: Set the maximum bit rate that can be used
by a single video stream. Available options are: Unlimited, 400
Mbps, 200 Mbps, 100 Mbps, 50 Mbps. Selecting “Unlimited”
will use up to the maximum available bandwidth in order to
maintain a full framerate video stream.
Note: While it is generally suggested to select “Unlimited” when
streaming 1080p video sources, the amount of bandwidth
required can be large and will limit the number of concurrent
video streams.