1
1. INTRODUCTION
This HDBaseT 2.0 Receiver is a great solution for receiving
uncompressed HD audio and video as well as Ethernet and control via
a single run of Cat.5e/6/7 cable over distances of up to 100 meters.
Multiple data and control signal types are supported, including USB 2.0,
IR, RS-232 and LAN connections. An independent balanced analog
stereo audio output is also provided to support easy audio signal
extension from compatible Transmitters. The HDBaseT input supports
receiving resolutions up to a maximum of 4K@30Hz (4:4:4, 8-bit) or
4K@60Hz (4:2:0, 8-bit) from a compatible HDBaseT Transmitter.
When paired with this unit’s standard Transmitter, 2 switchable USB 2.0
host (Type B) connections are available (1 on the Transmitter, 1 on the
Receiver) which can connect to devices on up to 6 USB 2.0 (Type A)
ports (3 on the Transmitter, 3 on the Receiver) forming a highly flexible
KVM extension configuration (Note: Only 1 USB host may be active at
a time).
This Receiver (PSE) can provide PoH (Power over HDBaseT) power to
the connected HDBaseT Transmitter (PD) (compatible Transmitters
only), allowing for greater flexibility within different installation
scenarios. This unit is controllable via a front panel button.
2. APPLICATIONS
• Lecture room display and control
• Showroom display and control
• Meeting room presentation and control
• Classroom display and control
3. PACKAGE CONTENTS
• 1× HDBaseT to HDMI/USB Receiver
• 1× 24V/2.7A DC Power Adapter
• 1× 3.5mm to IR Blaster Cable
•
1× 3.5mm to IR Extender cable
• 1× Shockproof Feet (Set of 4)
•
1× Operation Manual
