19
6.5 RS-232 Control
Serial Port Default Settings
Baud Rate
19200
Data Bits
8
Parity Bit
None
Stop Bits
1
Flow Control
None
6.6 Telnet Control
Before attempting to use Telnet control, please ensure that both the
unit and the PC are connected to the same active networks.
To Access the Command Line Interface (CLI)
Windows 7
Click
Start
, type “cmd” in the search field, and
press
Enter
.
Windows XP
Click
Start
>
Run
, type “cmd”, and press
Enter
.
Mac OS X
Click
Go
>
Applications
>
Utilities
>
Terminal
.
Once in the Command Line Interface (CLI) type “
telnet
” followed by
the IP address of the unit (and the port number if it is non-standard)
and then hit “Enter”. This will connect us to the unit we wish to control.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Adminstrator\telnet 192.168.1.50 23
Note: The default IP address is 192.168.1.50. If the IP address is
changed then the IP address required for Telnet access will also
change accordingly.
RI
CTS
RTS
DSR
GND
DTR
TxD
RxD
DCD
1
2
3
4
5
6
7
8
9
Summary of Contents for CDPS-P311
Page 1: ...CDPS P311 4K UHD HDMI Video Streamer Operation Manual Operation Manual ...
Page 2: ......
Page 43: ......
Page 44: ...CYPRESS TECHNOLOGY CO LTD www cypress com tw ...