21
6.6.8 Image Adjust
1
2
3
1
Brightness, Contrast, Saturation and Hue Adjustment:
Again all
settings under Image Adjust can be done with single TV Wall
device or multiple TV Wall devices with single click on “ALL IP”.
Parameter and default value are as stated in RS-232 description.
2
Picture Reset:
Picture Reset button is to reset all settings of Image
Adjust back to factory default value.
3
Refresh:
Refresh button is to refresh Image Adjust page only.
Note:
1. When Input signal is above 4K2K, device only support Color space
RGB, YUV is not supported.
2. When on TV Wall split mode, different input/output resolution,
signal is limited( please refer 9.3 Timing Limitation).
