CynkoMet T-149, Instructions For Use And Operation

Page: 48 / 148

Cynko Met
T-149
48

Set the drawbar hitch anchorage on the height of the
transport hitch of the tractor (this can be achieved by
adjusting the drawbar spring tension).

Reversing the tractor, connect the drawbar end with the upper
transport hitch of the tractor (if in the agricultural tractor, an
automatic coupler is used, ensure that the aggregate
operation has been completed correctly and the drawbar
anchorage is secured).

Stop the tractor engine.

Install and secure the hitch pin against falling out.

Connect with the electric, hydraulic and brake installation
wiring with the trailer.

Release the parking brake of the machine.
CAUTION!
CAUTION!
At the time of the coupling, unauthorized
people cannot be between the trailer and the
tractor. The operator of the tractor, when
connecting the machine should be particularly
careful when working and make sure that in the
course of coupling, other people are not in the
danger zone.
When connecting the hydraulic hoses to the
tractor, pay attention that the hydraulic system
of the tractor and the trailer are not under
pressure.
When coupling ensure adequate visibility.
Connecting the trailer with a hitch other than a
transport hitch is unacceptable because it
threatens the safety of road traffic
After completion of the machine coupling, check
the security of the hitch.