CynkoMet N-235 Series, Instructions For Use And Operation

Page: 18 / 124

Cynko Met
N-233
18
•
Check the technical condition of hydraulic and pneumatic hose connections
regularly. Oil and air leaks are a sign of damage to the system, making
further use of the machine impossible.
•
In case of failure of the hydraulic or pneumatic installation, the spreader
should be out of operation until failure removal.
•
When connecting hydraulic hoses to the tractor, remember that the
hydraulic system of both machines must not be under pressure. If necessary,
reduce the pressure in the system so as to enable connection.
•
In the case of injury by a jet of hydraulic oil, consult a physician immediately.
Hydraulic oil may cause infections if it penetrates into the body. In the event
of eye contamination, wash eyes with a large amount of water and consult a
physician.
• In the event of contact of oil with skin, wash the dirty spot with soap and
water. Do not use organic solvents (petrol, kerosene).
• Use the hydraulic oil recommended by the manufacturer.
•
After replacing the hydraulic oil, the used oil must be disposed of. Used oil is
to be stored in its original containers or in hydrocarbon-resistant substitute
packages. Replacement containers must be carefully described and stored
properly.
•
It is forbidden to store hydraulic oil in packaging designed for food storage.
3.5 Maintenance.
•
Repair, maintenance and cleaning operations and the removal of functional faults
can be performed only after disconnecting the spreader from the tractor, i.e.
disconnecting the PTO.
•
During maintenance and repair work, use the appropriate tools and protective
clothing.
•
In the event where replacement is necessary - used oil and grease are to be
disposed of.
•
Before electrical, welding works and work on the electrical system, separate
the supply of power to the tractor's electrical system.
•
Use spare parts according to the catalog of spare parts.
•
Modifications can be made only with the permission of the manufacturer.
The basic condition for safety are original spare parts and components.
Using other parts may result in exclusion of liability of the manufacturer for
resulting consequences.