Speed Dome Camera Instruction Manual
23/35
Other Functions
z
Power Up Action
This function enables to resume the last action executed before power down. Most of
actions such as Preset, Swing and Group are available for this function but Jog actions
are not available to resume.
z
Park Action
This function enables to locate the camera to specific position automatically if operator
doesn’t operate the controller for a while. The Park Time can be defined as a interval
from 1 min. to 4 hours.
z
Origin Position
Using this function, the Origin position can be defined by operator. The Pan angle
display will be changed if you change the origin position. It is noted that tilt angle is not
affected by this function. The factory default of origin is the canter of pan range i.e.
home position.
z
Alarm I/O
2 Alarm Input and 2 Alarm output (Relay output) are used. If an external sensor is
activated, camera can be set to move to corresponding preset position. Also, the output
relay can be matched to some specific preset positions to do counteractions such as
turning on the light or sounding the alarm. It is noted that the latest alarm input is
effective if multiple sensors are activated.
OPERATION
3