Speed Dome Camera Instruction Manual
21/35
Preset
z
Function
Max. 64 positions can be stored as Preset position. Using Preset key together with
numeric keys in the controller, Preset can be stored or executed quickly. If you want to
change the factory default of Preset configuration (i.e. Labe1 of preset is blank, Dwell
time is 3 sec and Relay out is OFF.), those settings for each preset can be configured
using the OSD menu.
z
Set Preset
After you type
1 ~ 64
numeric key, press
Preset
key for longer than 2 seconds.
[
1 ~ 64
] + [
Preset
] (press longer than 2 seconds)
z
Run Preset
After you type
1 ~ 64
numeric key, press
Preset
key shortly.
[
1 ~ 64
] + [
Preset
] (press shortly)
z
Delete Preset
To delete Preset, use OSD menu.
Swing
z
Function
By using Swing function, we can make camera to move between 2 Preset positions
repeatedly. Swing speed can be selected from 3 steps i.e. FAST, NORMAL and SLOW. To
maintain observing capability regardless of zoom, the swing speed is automatically
adjusted to be proportional to zoom magnification. When zoom magnification is x1, the
nominal speed for FAST, NORMAL and SLOW mode is 60
°
/sec, 30
°
/sec and 15
°
/sec
respectively.
z
Set Swing
To set Swing, use OSD menu.
< Using controller with
Pattern
key >
After you type a numeric key Swing No. + 10 (i.e.
11~18),
press
Pattern
key in
the controller.
[
11~18
] + [
Pattern
] Ex) If Swing number is 3, press 13 +
Pattern
z
Run Swing
< Using controller without
Pattern
key >
After type 70+Swing No. (i.e.
71~78)
, press
Preset
key in the controller.
[
71~78
] + [
Preset
] Ex) If Swing number is 3, press 73 +
Preset
z
Delete Swing
To delete Swing, use OSD menu.
OPERATION
3