background image

This document is protected by copyright and is the property of American Auto-Matrix. It may not be used or copied in whole or 

in part for any purpose other than that for which it is supplied without authorization. This document does not constitute any 

warranty, expressed or implied. In the event of any conflict between the English language version and the translated version, the 

English language version shall take precedence.

Every effort has been made to ensure that all information was correct at the time of publication. American Auto-Matrix reserves 

the right to alter specifications, performance, capabilities, and presentation of this product at any time.

All trademarks, trade names, service marks, or logos contained herein are the property of their respective owners and are only 

used to describe the product(s) being listed in this document. Every effort has been made to properly capitalize, punctuate, and 

identify and attribute all required trademarks with the use of the appropriate ® or ™ wherever practical and possible. American 

Auto-Matrix is not affiliated or a licensee holder of any of the trademarks other than those detailed below. American Auto-Matrix, 

the American Auto-Matrix logo, the Rocket-A, Smart Building Solutions, Aspect, Aspect-Enterprise, Aspect-Facility, Aspect-Matrix 

MAX, Aspect-Nexus, Aspect-Studio and vSTAT are either registered trademarks or trademarks of American Auto-Matrix. 

One Technology Lane 

|

 Export, PA 15632 

|

 

P

 (724) 733-2000 

|

 

F

 (724) 327-6124 

www.aamatrix.com

 |

 

[email protected]

Part No : 1E-01-00-0067 

© American Auto-Matrix, A Cylon Energy, Inc. Company.

American Made

Summary of Contents for American Auto-Matrix Aspect Matrix MAX













Reviews: