44
The drying cabinet must be connected to a
230 V single-phase 50-60 Hz and protectively
earthed wall socket.
Fuse 10A.
The drying cabinet is supplied ready for con-
nection with a cable and an earthed plug.
Electrical connection
___________________________________
The drying cabinet should be connected to
an earthed wall socket using the connecting
cable supplied and must not be permanently
wired.
_________________________________________________
__________________________________
The socket should be located so that the plug
can be easily pulled out if necessary.
_________________________________________________
___________________________________
Check that the connection current agrees
with the data on the identification plate
and that the power cord is earthed correctly
in accordance with applicable standard. We
recommend that the power cord be fitted
with a residual current device (RCD).
_________________________________________________
___________________________________
The drying cabinet must be connected to a
dedicated circuit.
_________________________________________________
___________________________________
The manufacturer disclaims all liability if the
electrical connection has not been carried
out in the way described in this user manual.
_________________________________________________
___________________________________
NB:
A replacement cord must only be
fitted by a qualified electrician.
_________________________________________________
If the mains lead for any reason is damaged,
it must be replaced. A genuine spare part can
be obtained from the dealer who supplied
the cabinet.
Summary of Contents for TS 2190
Page 1: ...KORREKTUR 2019 01 30 bruksanvisning Torksk p Timer Drying Cabinet ECO Sensor...
Page 33: ......
Page 63: ......
