Cylinda TS 2190, User Manual

Page: 41 / 64

2 1
4 3
5
41
Positioning/Attachment
The drying cabinet must be level on a f lat
surface, resting on all four feet.
If there is a need for adjustment, lean the
cabinet and adjust the feet. Check with a
spirit level that the cabinet is level.
1. Plastic plug
2. Wall behind drying cabinet
3. Spacer
4. Rear wall of drying cabinet
5. Fixing screw with washer
________________________________________________________________________
The drying cabinet is intended only for location indoors in a dry place and secured to a wall
_______________________________________________________________________________________________________
__________________________________________________________________________
The drying cabinet must not be placed in an environment in which high-pressure water is
used for cleaning.
________________________________________________________________________________________________________________________
___________________________________
CAUTION:
The drying cabinet must not be
used without being secured to a wall owing
to the risk of tipping over forward. Wall fixing
also results in better door sealing.
_________________________________________________________
__________________________________
Bear in mind that the cabinet is top-heavy
and there is a risk of it tipping over. This
adjustment should be carried out by two
people.
_________________________________________________
The cabinet must be
secured to a wall
to
prevent tipping over and provide better door
sealing
1
Open the door and drill 8 mm holes in the
wall through the two pre-drilled holes in
the rear of the drying cabinet
.
2
Fit the plastic plugs in the wall, thread the
spacer onto the screw and fit with washer
as illustrated. Screws are contained in the
assembly kit.
Spirit level
Pre-drilled holes