Cylinda SV-DISK-O-AVH, User Manual

Page: 38 / 56

Settings
Do as follows to open the settings menu:
Description Button press
Turn off the dishwasher using the main power switch. Wait about five seconds. 1.
Then press the main power switch again. Wait until the numbers appear in the right-hand display before
continuing to the next step.
Within five seconds, press and hold the Programme selector (wait for the audible signal confirming the
button press) and then immediately press the Förlängd torkning (Long dry) button without releasing
the Programme selector.
+
2.
Keep the buttons pressed until the symbols for the Autodisk (Auto wash) and Avspolning (Rinse &
Hold) programmes start to flash.
TIP!
Be sure to press right on the symbols, so as not to inadvertently activate any other button. Try again if you fail to open the settings menu
the first time.
Display
Press to save the set value and continue to the
next setting.
Current setting.
Current setting value.
Press to browse between setting values.
You can now adjust the following settings:
Description Settings Options Button press
You can activate the child lock (button lock) option to
prevent children from starting the dishwasher.
Child lock
(button lock)
(Off)
(On)
Press the Förhöjd temperatur (High temperature) and
Förlängd torkning (Long dry) buttons simultaneously to
temporarily deactivate the button lock when you want to
start the dishwasher. The button lock is automatically re-
activated after 2 minutes.
Press Start/Stopp (Start/Stop) to save the setting value and continue to the next setting.
If you do not want to change any other settings, keep pressing Start/Stopp (Start/Stop) to step through the entire settings
menu.
The dishwasher uses a buzzer to indicate when a pro-
gramme is finished or when a fault has occurred.
Buzzer volume
(Off)
(Low)
(High)
Press Start/Stopp (Start/Stop) to save the setting value and continue to the next setting.
38