22
Hob installation
• Prepare opening in the worktop with dimensions shown on the assembly drawing (Fig.
2).
• Ensure minimum clearance of 80mm below the hob to allow proper air circulation and
prevent overheating.
• Connect the appliance to electricity mains Plug in accordance with the instructions in the
manual.
• Loosely attach fixing brackets to the bottom of the hob.
• Remove dust from the worktop, insert hob into the opening and press in firmly.
• Position fixing brackets (Fig.3) perpendicularly to the hob’s edge and tighten firmly.
Mounting fixing brackets in worktop
Fig. 3
Installing hob in the opening
Fig. 2
fixing
bracket
Wood screws
4.2 x 22
Top surface of the
worktop
Double-sided
adhesive tape
Hob to be in-
stalled
40
10
40
55
16
5
Location and dimensions of terminal
block compartment
INSTALLATION
270
490
min
50
0
1
2
3
0
1
2
3
290
510
