Cylinda FK 180, User Manual

Page: 16 / 24

6
GB
Electrical connection
Wiring and connections in power supply
systems must been all applicable (local and
national) electrical codes. Consult these
codes lengths and sizes prior to cabinet
installation.
This device complies with relevant EU
directives including Low Voltage Directive
2014/35/EU and Electromagnetic Compat -
ibility Directive 2014/30/EU
The socket should be freely accessible.
Connect the appliance only to 220/240 V
/ 50Hz alternating current via a correctly
installed earthed socket.
The socket must be fused with a 10-13 A
fuse.
If the appliance is to be operated in a non-
European country, check on the rating plate
whether the indicated voltage and current
type correspond to the values of your mains
supply.
Information regarding voltage, current or
power are given on the rating plate
The power cord may be replaced by a
technician only.
The rating plate provides various techni-
cal information as well as type and serial
number.
Placement
For safety and operational reasons, the ap-
pliance shall not be exposed to rain.
The appliance should be placed on a level
surface in a dry, well ventilated room (max.
70% relative air humidity). Never place
the appliance close to sources of heat and
avoid placing it in direct sunlight.
The surface on which the appliance is to be
placed must be level. Do not use a frame or
similar.
The appliance can be installed as a free-
standing unit against a wall or side-by-side
with other appliances (see fig. 4)
Room temperature
The climate class is stated on the name
plate (see fig. 1). This specifies the optimum
room temperature.
Note that the appliance operates best at
room temperatures from 10°C to 32°C.
Installation and start-up
fig. 2
Close the two ventilationguards placed on
the rear of the appliance, to ensure suffi -
cient air circulation
Installation of ventilation quard