
Automotive HD Video Recorder
Automotive HD Video Recorder
MICRO SD CARD
• Your CYL-V recorder is provided with a Micro SD card.
• The Micro SD card is preconfigured with factory default settings (see pages 9 -10)
• If desired, configuration settings may be changed to accommodate a fleets specific
requirements.
•
Do Not Use Micro SD Card for any other purpose. Using the Micro SD Card for any
other purpose will cause damage or losing important video files in the card.
At least once per year, format the Micro SD Card using PC program to prevent Micro SD Card
errors from occurring over a long period of time. Note that upon formatting the Micro SD
Card, all existing operating and data files will be deleted. Be sure to perform a backup of any
important video files and configuration prior to reformatting. After formatting, you may insert
the Micro SD card into CYL-V. The Recorder will automatically write the current configuration
file to the SD card. The “CYL-V Player” program does not automatically re-install onto the
Micro SD Card. If desired, it may be added manually by copying and pasting from another
location. A new Data folders will be created on the reformatted Micro SD Card and new Data
files will be created as driving resumes.
Consult Rosco or your authorized Reseller for Micro SD Card compatibility. Not all Micro SD
Cards work with CYL-V unit. The following is a list of approved Micro SD Cards which may be
purchased from Rosco. This list may be periodically updated without notice.
16GB
Sandisk Ultra SDHC Class 10, Transcend SDHC Class 10
32GB
Sandisk Ultra SDHC Class 10, Transcend SDHC Class 10
64GB
Sandisk Ultra SDHC Class 10, Transcend SDHC Class 10
MEMORY SIZE
14
15
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
Power
LED display is off
No chime heard
upon starting vehicle.
No power to recorder
Check the power cable
connections
LED
Display
LED lights are off but
beep sounds heard
upon starting vehicle.
System is in unknown
state or malfunction
Remove CYL-V Recorder from
the bracket and press “Reset”
button for few seconds and
check again or insert a brand
new or formatted blank SD card
and power up again to recover
Event
Green LED is constantly
blinking and constant
beeping
Constant Events and
chimes due to bumps
or potholes
Increase G-Sensor settings based
on your vehicle needs
Speed
Green LED is constantly
blinking and constant
beeping
Speed limit set too low
Increase Speed limit setting
through device configuration
based on your vehicle needs
GPS
GPS LED (Blue) remains
unlit while driving
GPS antenna is not
able to acquire satellite
signal due to weather
condition
Relocate CYL-V mounting base
to position on windshield with
line-of-sight to sky
SD card
Error
Constant beeps
SD error, no SD
card,not recording
video files
Remove and properly insert SD
card into slot or reformat or
replace SD card
Playback Blurry video or no
video image
Camera/lens problem
Make sure Camera/lens is clean
and clear of obstructions and
not damaged
Playback No audio
Improper audio setting
in CYL-V Player (mute)
or configuration error
Configuration - set audio
recording check mark to “ON”.
Player – adjust volume control
slider as desired or unmute.
Check speaker settings on PC.