cyclotest myWay, Instructions For Use Manual, Page: 49 / 60

Frequently Asked Questions
EN-49
What if I forgot my PIN?
Please call the cyclotest® service hotline and have the serial number of your unit ready. The serial
number is located on the base of the battery compartment.
How can I delete all the user data?
The stored data can be deleted using cyclotest® mySoftware. For information on cyclotest® mySoft-
ware, see separate instructions for use.
When and how often should I take my temperature?
What if I forgot to take my temperature?
If one or two temperature measurements were missed, it is not important. Simply carry on normally on
the next day. If there are too few measurements for the cycle to be evaluated optimally, the unit will
display a longer fertile phase than usual in order to be safe.
What if I have a fever?
An atypical increase in temperature is disregarded during the cycle recording. If there are not enough
temperature values that can be accurately evaluated during a cycle, the fertile phase is extended. You
can manually note this measurement as a disruption via the Input menu (see P. 29).
What happens if I travel and change time zones?
When travelling to a different time zone, you should pause your measurements until you have ac-
climatised to your destina-tion (at least 3 days for travel outside Europe). If you have any questions,
please contact the cyclotest® service hotline.
You can start your daily temperature measurement the morning after your cycle begins. It is important
that you slept for at least 5 hours and you did not get out of bed in the hour prior to measurement.
You do not have to continue taking your daily temperature during the long infertile phase after ovu-
lation. The current cycle is then concluded by the next cycle start. In the event of irregularities (e.g.
not enough sleep, party, alcohol, stress, eating rich food late at night, use of temperature-altering
medication, illness or fever), you should skip the temperature measurement or record it as a disruption
(see P. 29).