BOOT RELEASE
Press the second button on the remote control and keep it depressed until the boot
releases*. This will take about three seconds. A successful boot release signal will
disarm the alarm and flash the vehicle indicators four times. This function can only
operate if the vehicle is equipped with an electrical boot release.
ANTI HIJACK
Two seconds after the ignition is switch to the ON position, the P385 will lock the
cars doors. The lock signal will be cancelled if the P385 detects any connected door
open*. As soon as the ignition switch is turned off, the P385 will unlock the doors*.
This feature comes as standard, and can be disabled (see option #3).
ELECTRIC WINDOW CLOSER
Only when the P385 is armed by remote control, the electric windows of the car will
roll up until closed.
PROBLEM SOLVING
System won't arm. LED on dash won't flash.
!
Make sure that ignition switch is in the OFF position.
!
Ensure the vehicle battery is not flat.
!
Try your spare remote transmitter unit.
System won’t disarm. LED on dash won’t extinguish.
!
Try spare remote control.
!
Use Emergency PIN to override system and contact nearest Cyclops service centre.
The remote fails to operate
!
If the remote fails to operate and the LED does not light up when the button is pressed then change the
battery. To do this you will need a small screwdriver. See page 12 for details on battery. replacement
-17-
Summary of Contents for PARALYSER 385
Page 1: ...DELUXE REMOTE ALARM USER INSTRUCTIONS PROUDLY AUSTRALIAN CYCL PS SECURITY SYSTEMS...
Page 4: ...4...
Page 20: ...20...
