background image

WARRANTY

The Dynamco range of Cyclops Security Systems is covered by an extensive two year warranty (parts & accessories one 

year). In the unlikely event of a faulty system Dynamco will either replace or repair the system at no cost during the 2 year 

period. 
The warranty does allow for the following conditions ~
Subject to the conditions stated below, Dynamco Pty Ltd warranty the product to be free from manufacturing defects and 

faulty material within the warranty period stated.
 That the warranty registration has been completed in full at the time of purchase / installation and is produced when 

warranty service is sought
The warranty does not cover general maintenance such as cleaning / adjusting of door, boot, bonnet or any entry point 

switch, nor replacement of consumables items such as transmitter batteries, lighting circuit bulbs / switches. 
The warranty shall be null & void if: - 

Any person other than by an Authorised Cyclops Sales, Service & Installation Centre has repaired the product.
Should a system / part defect become apparent within the warranty period DYNAMCO PTY LTD will repair the product 

free of charge for parts and labour. The warranty does not cover service labour content or mobile service content.
The product has been altered or tampered with in any way, or the serial number altered, defaced or removed.
The defect has been caused by negligence by the owner or their agent / third party.
The product has not been operated correctly, installed by an unauthorised Cyclops installer or has been subjected to 

misuse or undue wear and tear
Siren, control module, remote controls or any other system part are damaged by water.

The warranty does not cover the following costs: -

Transport of the product to and from Cyclops Service Centres.
Insurance of the product whilst in transit to or from the Cyclops Service Centres.
Cost of any service call / labour where the product is found by Cyclops to be in good working order.

The benefits conferred by this Warranty are in addition to all other rights and remedies, which the consumer has conferred 

in law.
“No liability is accepted for any loss from, damage to or inability to use the vehicle to which the system is installed”.

1.
2.

3.
4.
5.

6.

1.
2.
3.

-19-

P355 P375 P375B 385 User - 2008.19   19

16/07/2008   3:20:43 PM

Summary of Contents for PARALYSER 355





















Reviews: