Intended Application Uses
This product was evaluated as Information Technology Equipment (ITE), which may be installed in
offices, schools,
computer
rooms, and similar commercial type locations. The suitability of this
product for other product categories and environments (such as medical, industrial, residential,
alarm systems, and test equipment), other than an ITE application, may require further evaluation.
Site Selection
The system is designed to operate in a typical office environment. Choose a site that is:
Clean, dry, and free of airborne particles (other than normal room dust).
Well-ventilated and away from sources of heat including direct sunlight and radiators.
Away from sources of vibration or physical shock.
Isolated from strong electromagnetic fields produced by electrical devices.
In regions that are susceptible to electrical storms, we recommend you plug your system into a
surge suppresser and disconnect telecommunication lines to your modem during an electrical
storm.
Provided with a properly grounded wall outlet.
Provided with sufficient space to access the power supply cord(s), because they serve as the
product's main power disconnect.
Equipment Handling Practices
Reduce the risk of personal injury or equipment damage:
Conform to local occupational health and safety requirements when moving and lifting
equipment.
Use mechanical assistance or other suitable assistance when moving and lifting equipment.
To reduce the weight for easier handling, remove any easily detachable components.
Power and Electrical Warnings
CAUTION
Power is turned on and off by the host system in the cable. When off, stand-by power is ??, DOES
NOT completely turn off the system AC power, 5V standby power is active whenever the system is
plugged in. To remove power from system, you must unplug the AC power cord from the wall
outlet. Your system may use more than one AC power cord. Make sure all AC power cords are
unplugged. Make sure the AC power cord(s) is/are unplugged before you open the chassis, or add
or remove any non hot-plug components.
Do not attempt to modify or use an AC power cord if it is not the exact type required. A separate
AC cord is required for each system power supply.
The power supply in this product contains no user-serviceable parts. Do not open the power
supply. Hazardous voltage, current and energy levels are present inside the power supply. Return
to manufacturer for servicing.
When replacing a hot-plug power supply, unplug the power cord to the power supply being
replaced before removing it from the server.
