RELEASE DATE:
BY:
REVISION DATE:
REV
PRODUCT NAME:
PRODUCT NUMBER:
ASSEMBLY INSTRUCTIONS
31-Aug-10
Pocket Shelter
17450
GM
A
Common Tools Needed:
● Impact Wrench or Socket Wrench set - 1/2" drive minimum w/bit adapter
Step 1:
Carefully place the Top Panel (10301) on its upper surface so the under side is facing up.
Attach the Top Rail (17455) to the under side of the Top Panel (10301)
with the 5/16-18NC X 1-1/2 X 3" SHMS (17456). Do not tighten until after Step 2.
5/16-18NC X 1-1/2 X 3" SHMS (17456)
Top Rail (17455)
Top Panel (10301)
Step 2:
Using the 5/16-18NC X 1-1/4" SHMS (10222) attach the Side Leg Weldments (17451) to the
Top Panel (10301).
DO NOT overtighten the fasteners to the SMC plastic
Side Leg Weldment (17451)
parts. They should only be wrench snug!
5/16-18NC X 1-1/4" SHMS (10222)
4 per side
Make sure to align the Side Leg Weldment
with the Top Panel bosses and the
Top Rail
ALWAYS OBSERVE POSTED SAFETY GUIDELINES
SHELTER ASSEMBLY
WHEN ASSEMBLING THIS PRODUCT. ALWAYS WEAR SAFETY GLASSES
Align parallel: Leg
Weldment with Top Panel
WI4.9.036 Pocket Shelter Installation Instruction.xlsx
Printed: 6/21/2022
CONTROLLED DOCUMENT
Page 2 of 4
FM4.5.002
Rev -B
