Page 8
SAFETY INSTRUCTIONS
BE SURE TO READ AND UNDERSTAND THE SAFETY AND OPERATIONS SECTIONS OF THIS MANUAL. FAILURE TO USE COMMON SENSE AND
HEED ALL WARNINGS AND INSTRUCTIONS INCREASES RISK OF SERIOUS INJURY OR DEATH. USE WITH APPROPRIATE CAUTION AND SERIOUS
ATTENTION TO SAFE OPERATION.
The CycleBoard should be maintained and repaired in accordance with the manufacturer’s specifications, using only the
manufacturer’s authorized replacement parts, and should not be modified from the manufacturer’s original design and configuration.
ACCEPTABLE RIDING PRACTICES AND CONDITIONS
Always check and obey any local laws or regulations, which may affect the locations where the CycleBoard may be used. Do not
turn on or activate the throttle unless you are standing on the CycleBoard with both hands on the handlebars and in a safe, outdoor
environment suitable for riding. The normal powered top speed of the CycleBoard will be approximately 20 mph/32km/h, which can
be affected by conditions such as rider weight, inclines, tire inflation and battery charge level. Avoid excessive speeds that can be
associated with downhill rides. Do not do “wheelies” or pull up on the handlebars when riding, as this could cause damage to the
CycleBoard or injury to the rider. Do not touch the brakes or motor of your CycleBoard when in use or soon after riding as these parts
can become very hot. Watch out for potential obstacles that could catch your wheel or force you to swerve suddenly or lose control.
Be careful to avoid vehicles, pedestrians, skateboards, scooters, bikes, other moving obstacles, or animals who may enter your path,
and respect the rights and property of others. The CycleBoard is intended for use on flat surfaces such as pavement or level ground.
Wet, slick, bumpy, uneven or rough surfaces may impair traction and contribute to possible accidents. Do not ride in mud, snow, ice,
puddles or water. Avoid sharp bumps, drainage grates, and sudden surface changes. Do not attempt to do stunts or tricks, it is not
made to withstand abuse from misuse, such as jumping, curb grinding or any other type of stunts. Racing, stunt riding, or other extreme
maneuvers enhance the risk of loss of control. Do not ride at night without adequate lighting and visibility. Never use near steps, large
drop offs or swimming pools. Do not allow hands, feet, hair, body parts, clothing, or other articles or objects to come in contact with
moving parts, wheels, or while the motor is running. Never hitch a ride or hold onto another vehicle while on the CycleBoard. Do not
immerse the CycleBoard in water, as the electrical and drive components could be damaged by water or create other possibly unsafe
conditions. Make sure all bolts and screws are tight before riding. CHECK AND MAINTAIN SAFE CONDITIONS before use.
