Page 24
BATTERY CHARGER
CHARGING PORT
BATTERY AND CHARGER USE AND CARE (CON’T)
CHARGING YOUR CYLEBOARD:
1.
Turn the CYCLEBOARD off before charging or before conducting any
maintenance or assembly procedures.
2. Plug one end of the charger into the charging port on the left side of the
CYCLEBOARD frame.
3. Plug the other end of the charger into a standard 110V or 220V wall outlet.
Check to confirm that the LED light on the charger lights up.
4. The LED light on the charger will turn from red to green once the
CYCLEBOARD is fully charged.
5. Unplug the charger from the outlet and the charging port and do so
promptly after charge is complete.
Note:
Fully charge your CYCLEBOARD battery before the first use
Note:
The CycleBoard battery charger
is designed to work in 110 to 220 volt
environments. You may need to purchase a
plug adapter depending on the type of outlet
used in your country.
WARNING:
RECHARGEABLE BATTERIES ARE ONLY
TO BE CHARGED UNDER ADULT SUPERVISION.
ALWAYS DISCONNECT YOUR CYCLEBOARD FROM
THE CHARGER BEFORE CLEANING WITH DAMP
CLOTH. CHARGER MAY GET WARM DURING USE.
THIS IS NORMAL FOR SOME CHARGERS AND IS NO
CAUSE FOR CONCERN. IF YOUR CHARGER DOES
NOT GET WARM DURING USE, IT DOES NOT MEAN
THAT IT IS NOT WORKING PROPERLY.