Web Manager Wizard
91
Configuring Network Interfaces—Wizard
T
To Select or Configure a Security Profile—
Wizard
1.
Log into the Web Manager as an administrative user.
See “To Log Into the Web Manager” on page 75, if needed.
2.
Click the “Wizard” button.
Click the “Security profile” option in the left menu bar.
3.
Click the “Proceed” button.
4.
Select a security profile from the “Security Level” pull-down menu.
5.
If you select the “Custom” profile, make sure the checkboxes are checked
next to services and features you want to be enabled and make sure the
checkboxes are clear next to services and features you want to be
disabled.
6.
Click “OK.”
The security profile confirmation screen appears.
7.
Click the “Save and apply changes” button.
8.
Click the “Next” button, if desired, to go to the next Wizard step.
Configuring Network Interfaces—Wizard
Figure 3-1 shows the first of a series of related screens that appears when the
“Network interfaces” option is selected from the Wizard menu.
Figure 3-11:
Network Interfaces Screen—Wizard
Summary of Contents for AlterPath OnBoard
