Cyclades AlterPath KVM 16, Manual

Page: 123 / 206

4: KVM Web Configuration
AlterPath KVM Manual 4-31
The IP Users form is used to configure the following web user’s console
and keyboard settings.
10. Complete the data entry fields for Web User and then click on the Apply
Changes button to save your configuration.
Configuring the TCP Viewer Ports Address
By default, if no addresses are specified, the system automatically assigns the
available port addresses to the KVM starting at 5900. When an additional port
is added, the system automatically assigns the address 5901. To override this
default, you can assign your own port address to the KVM through the IP
Users form.
To configure the TCP viewer ports address, follow the procedure below:
1. In the TCP Viewer Ports field of the IP Users form, type in the available
TCP port address of your choice using any of the following methods:
Use the plus sign (+) to assign a TCP port address which will be
incremented by 1 for each additional TCP port that is added (
e.g ., 5903+).
Use the hyphen ( - ) to indicate a range of addresses ( e.g ., 5903-5907)
Use the comma (,) to separate two TCP port addresses. ( e.g ., 5901,5903)
Combine commas and hyphens, as necessary ( e.g ., 1901,5903-
5905,5907).
2. Click the Save button to save your configuration.
Verifying the TCP Port Address
If you need to verify the new address, follow the procedure below:
1. Log onto the KVM web management interface.
2. Access an output port on the KVM.
3. From a command prompt window, enter the command:
netstat -n
The system should display the TCP port address(es) that you assigned to
the KVM.