06
MAINTENANCE
You are advised to regularly maintain, clean and check the status
of the bike and motor system as dirt will accumulate throughout
the rides and additional strain will be taken by the drive train due
to the powerful motor system. We recommend that users should
inspect the bike and motor condition before and after each ride.
Disconnect all power supplies from the drive unit before starting
any work (e.g., inspection, repair of the bike, maintenance work
etc.) on the bike, transportation or storage. Unintentional
activation of the drive unit could lead to serious damage or injury.
Never reach into the chains, gears or any moving parts while the
bike is still in operation.
The drive unit can get quite hot after use, be sure to give it some
time to cool down before doing any maintenance.
Store the bike in a cool and dry place, sheltered from direct
sunlight and potential rain.
Do not attempt to disassemble or modify the drive unit. The drive
unit may only be repaired and maintained by qualified experts and
only replaced with original spare parts. This will ensure that the
safety/warranty of the drive unit is maintained.
The active moving parts (e.g., chain, gear, speed reducer etc.)
should be regularly lubricated to maintain desired performance. In
case of any abnormal activity, stop using the drive unit immediately
and contact your CYC dealer.
Do not attempt to replace the X1 PRO parts with the parts that have
been found at a local bicycle store as the materials used in the
drive unit are specifically designed for their purposes.
All bolts, nuts and screws are required to be tightened to the
correct torque, if there is anything loose, stay off the bike. Torque
specifications for each bolt and nut is provided below.
