background image

Cybex Owner’s Manual

 9

Assembly

Machine Specifications

Total Weight and Size

 

VR1 Multi-Press 13240 Standard Stack

Weight

Machine Dimensions at Rest

Machine Dimensions in Use

482 Lbs

78” L x 51” W x 62” H

Same

219 Kg

198 cm  L x 130 cm W x 157 cm H

Same

Total Weight and Size

 

VR1 Multi-Press 13240 Standard Stack

Weight

Machine Dimensions at Rest

Machine Dimensions in Use

412 Lbs

78” L x 51” W x 62” H

Same

187 Kg

198 cm  L x 130 cm W x 157 cm H

Same

Tools Required

•  7/32” Allen wrench

•  3/4” Socket or wrench

•  Hammer

•  3/16” Pin punch

Two people will be required for this procedure. It is the responsibility of the facility owner/owner of the 

equipment to ensure that there is appropriate clearance around each machine to allow for safe use 

and passage.

Assembly Procedures

Two people will be required for this procedure.

Read and understand all instructions thoroughly before assembling this unit. Check all items 

carefully. If there is damage, see the Customer Service section of this manual for proper procedure to 

return, replace, or reorder parts.

Qty

Part Number

Description

Diagram

4

13000-353

Foot Pad

1

13000-354

Foot Pad

1

13000-355

Foot Pad

Summary of Contents for VR1 multi-press





























Reviews: