CYBEX Structure ST-FSS, Assembly Instructions Manual

Page: 19 / 46

Half Rack / Half Rack Combo
1. Install screws, washers, and locknuts securing the forged strength feet to the base assemblies.
Item Description Qty.
1 Forged Strength Foot 8
2 3” x 6” Rubber Slipper 8
3 3/4"- 10 Hammer Lock Nut 12
4 1/2”-13 Lock Nut 8
5 1/2” Flat Washer 8
6 1/2-13 x 1-1/4” Hex Head
Screw
8
Tighten hardware to 20-25 ft-lb
(27-34 Nm).
2. Install rubber slippers onto the forged strength feet.
3. Install screws and washers securing the upright assemblies to the base assemblies.
Item Description Qty.
1 3/4-10 x 1-1/4” Hex Head
Screw
4
2 3/4” Flat Washer 4
Hand tighten hardware.
4. Install screws, washers, spacers, and locknuts securing the cross member assembly to the upright and base assemblies.
Page 17 of 44