Page 8
Cybex Free Weight Owner’s Manual
Figure 3
Support
A (Qty of 3 each side)
B
(Qty of 3 each side)
6. Verify proper operation.
5. Securely anchor machine to the fl oor.
Securely anchor machine to the fl oor using the anchor holes provided in each machine.
A.
NOTE: Cybex is not responsible for the actual anchoring of equipment. Consult with a professional contractor.
NOTE: Use fasteners having a minimum of 500 lbs. tensile capacity (3/8’’ grade 2 bolts or better).
NOTE: If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any leg or
frame not in contact with surface using fl at washers.
Cross Tube
Figure 2
B
(Qty of 2 each sides)
A (Qty of 2 each side)
Magnifi ed view of locknut placement.
Using a 7/32” Allen wrench and a 9/16” wrench secure cross tube in place with the four (B) BHSCS and (4) A
D.
locknuts from shipping package.
Place support in position. See Figure 3.
E.
Using a 7/32” Allen wrench and a 9/16” secure support to frame with the
F.
six (B) BHSCS and (6) (A) locknuts from
shipping package. See Figure 3.
Summary of Contents for Free Weight Squat Rack
