1-2
Facility Safety Precautions
•
Read the Owner’s Manual carefully before assembling, servicing or using the equipment.
•
Securely anchor each machine to the floor using the anchor holes provided in each machine.
NOTE:
Cybex is not responsible for the actual anchoring of equipment. Consult with a professional contractor.
NOTE:
Use fasteners having a minimum of 2,200 newtons tensile capacity (3/8” grade 2 bolts or better).
NOTE:
If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any
leg or frame not in contact with surface using flat washers.
•
Make sure that each machine is set up and operated on a solid level surface.
Do not install equipment on an
uneven surface.
•
Make sure that all users are properly trained on how to use the equipment and proper supervision based on individual
indiciation is provided.
•
Make sure there is enough room for safe access and operation of the equipment.
NOTE:
At least one meter around
machine when in exercise position.
•
Perform mandatory safety inspections. Perform regular maintenance checks on the equipment. Also pay close atten-
tion to all areas most susceptible to wear, including (but not limited to) cables, pulleys, belts and grips.
•
Immediately replace worn or damaged components. If unable to immediately replace worn or damaged components
then remove from service until the repair is made.
•
Use only Cybex supplied components to maintain/repair the equipment.
•
Keep a repair log of all maintenance activities.
•
Inspect all cables and belts and connections prior to use.
DO NOT
use if any components are worn, frayed or
damaged.
NOTE:
It is the sole responsibility of the user/owner or facility operator to ensure that regular maintenance is performed.
NOTE:
Check range of movement of patient carefully before using equipment. Select resistance according to the
individual indication. If you are unsure then start at lowest level. Perform exercise using smooth controlled
movements.
Safety Guidelines And Practices
Cybex recommends that all training equipment be used in a supervised area. It is recommended that the equipment be
located in an access controlled area. Control is the responsibility of the owner. The extent of control is at the discretion of
the owner.
It is the responsibility of the purchaser/user of Cybex products to read and understand the owner’s manual, and warning
labels; as well as instruct all individuals, whether end users or supervising personnel, on proper usage of the equipment.
PROPER USAGE:
Use machine only as described in the manual. Failing to follow proper instructions may result in injury.
Do Not Lean Against or Pull
On the framework, weight stack, or any component, whether machine is at rest or in use.
Inappropriate or improper use may result in injury to users or third parties (bystanders).
Do not use machine if it is not located on a solid level surface or is improperly installed.
Provide an adequate safety perimeter between the machine, walls and other equipment to ensure that the facility has the
proper clearance for usage and training.
