background image

Cybex Eagle 11150 Incline Press Owner’s Manual

Customer 
Service
Page 3-2

 

1

. Call the Customer Service Hot Line listed above for the return of any item that is defective.

 

2

.  Provide the technician with a detailed description of the problem you are having or the defect in the 

item you wish to return.

 

3

. Provide the model and serial number of your Cybex equipment.

 

4

.  At Cybex’s discretion, the technician may request that you return the problem part(s) to Cybex for 

evaluation and repair or replacement. The technician will assign you a RMA number and will send 
you an ARS label. The ARS label and the RMA numbers must be clearly displayed on the outside 
of the package that contains the item(s) to be returned. Include the description of the problem, the 
serial number of the equipment and the name and address of the owner in the package along with 
the part(s).

 

5

. Forward the package through UPS to Cybex.

 

    Attn: Customer Service Department

 

    Cybex International, Inc.

 

    1975 24th Ave SW

 

    Owatonna, MN 55060

NOTE:  Merchandise returned without an RMA number on the outside of the package or shipments sent 

COD will not be accepted by the Cybex receiving department.

Materials damaged in shipment should not be returned for credit. Shipping damages are the responsibility 
of the carrier (UPS, Federal Express, trucking companies, etc.)

Apparent Damage -

 Upon receipt of your shipment, check all items carefully. Any damage seen with a 

visual check must be noted on the freight bill and signed by the carrier’s agent. Failure to do so will result 
in the carriers refusal to honor your damage claim. The carrier will provide you with the required forms for 
fi ling such claims.

Concealed Damage - 

Damage not seen with a visual check upon receipt of a shipment but

notices later must be reported to the carrier as soon as possible. Upon discovery of the
damage, a written or phone request to the carrier asking them to perform an inspection of the materials 
must be made within ten days of the delivery date. Keep all shipping containers and packing materials as 
they will be needed in the inspection process. The carrier will provide you with an inspection report and 
the necessary forms for fi ling a concealed damage claim.
Concealed damage claim is the carrier’s responsibility.

Damaged Parts

Summary of Contents for Eagle 11150











































Reviews: