![background image](http://html1.mh-extra.com/html/cybex/626ak010/626ak010_installation-instructions-manual_2703652007.webp)
Page 7 of 9
www.cybexintl.com
Remove right wheel
1.
Place a block under unit to elevate right wheel. Block must be at least 3.5” high.
Block
Bolt
Wheel
Nut
Lockwasher
Minimum
3.5” High
2.
Remove bolt, lockwasher, and nut securing right wheel using a 7/16” wrench and a 5/32” Allen
wrench.
Route Cables
1.
Feed cables down through the bottom of the frame (where the wheel was removed).
2.
Route cables back up through the bottom of the frame and out the access hole.
Power and COAX
CAT6
Install right wheel
1.
Install wheel, bolt, lockwasher, and nut securing right wheel using a 7/16” wrench and a 5/32”
Allen wrench.
Block
Bolt
Wheel
Nut
Lockwasher
Minimum
3.5” High
2.
Remove the block.