Shenzhen Zhiyong Electronics Co., Ltd
3
1. Summary
DP6020 probe
is the low voltage differential probe with float ground testing function. Test voltage
±20V(DC+Pk), maximum bandwidth up to 200MHz, with 10:1 attenuation setting, can largely decrease the
circuit load. With the overload alarm function, the DP6020 can adapt with any oscilloscope with 50Ω BNC
input, and can be powered by the USB port on oscilloscope or other computers. Widely used in many
applications, DP6020 can provide excellent general differential signal testing for high speed power
measurement, vehicle bus testing and digital system design.
2. Application
Floating voltage measurement
High speed power testing
Digital differential bus
Vehicle serial bus
（
CAN
、
LIN
、
FlexRay
）
3.Product and Accessories
■
Product
Detailed Instruction
Input Cable
: length around 15cm, used to measure the voltage signal
Offset Adjust:
adjust the resistor to realize the adjusting of the output
Connecting Cable:
the connector of the front and back side of the probe, length around 70cm
Power Supply Port
: standard USB Type B port, power up by standard USB adaptor. Can also
be powered by oscilloscope, easy to use
Overload alarm indicator:
when the measuring range surpass the limit, the overload indicator
will be lighted, and buzzer will be activated.
Output Port
: standard BNC output port can be connected to the oscilloscope of any brand. The
input impedance of the oscilloscope is required to be 50Ω, or connect to thorough 50Ω load,
with input impedance set to 1MΩ
CYBERTEK
