Shenzhen Zhiyong Electronics Co., Ltd.
1
For your safety
Please strictly follow the safety tips below. If you don’t follow the instruction, the potential consequences
could damage the machine or hurt the users. We will not be responsible for any problem caused by violating
the rules
Make sure the product is used in rated voltage and current range.
Do not open the shell or try to connect cable during operation
Do not use the probe in moist or combustible environment
Make sure the device is dry and clean before using.
If there’s anything wrong with the product, please contact us immediately. Do not open the shell and
try to repair the machine or worse incident could occur.
1. Summary
CP1000B
current probe is used for alternating current testing. The current under test reaches effective
value of 1000A, peak value of 2000A, bandwidth of 10 kHz. The current transfer ratio is 1000:1.Clamp
diameter is around 54mm. With its banana plug or BNC output port, CP1000B can be connected to the
oscilloscope of any brand, digital multi-meter or power analyzer. It can be widely used in the testing like
motor drive, inverter, power switch and avionics.
2. Product and Accessories
Clamp description
1.
Clamp: Used to fix the cable under test, diameter around 54mm
2.
Output cable: about 2 meter. Optional port: banana plug or BNC output port.
3.
Current indication direction: the current flow through the current direction is
counted positive, otherwise it is negative.
Warning
CYBERTEK
