CyberResearch MPE 06, User Manual

Page: 66 / 98

MPE Series
CyberResearch
®
Displays
66 ©Copyright 2011 CyberResearch, Inc.
5.5.4 Wall Mounting
CAUTION:
Due to safety concerns, it is highly recommended to use the VESA mounting
kits provided by CyberResearch, Inc. for wall and arm mounting. If the VESA
mounting kit is purchased separately, please make sure the mounting kit is
UL-listed.
Each model of the MPE series LCD monitor has four holes located on the rear panel for
mounting the monitor to a wall. To mount the MPE series LCD monitor onto a wall, please
follow the steps below.
Step 1: Select a location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four bracket screw holes on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.
Step 5: Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (
4
Figure 5-18 ).