CyberResearch CYRAQ PPC Series, User Manual

Page: 39 / 103

CyberResearch
®
Panel PCs C
Y
RAQ
®
PPC Series
CyberResearch, Inc
.
27
25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA www.cyberresearch.com
7. Re-install the storage drive
assembly then secure it
with the screws you
removed earlier.
To install a Serial ATA hard disk drive:
1. Follow steps 1-3 of the previous section.
2. Connect one end of the supplied 7-pin
SATA cable to the connector at the back of
the drive, then connect the other end to the
SATA connector on the motherboard. See
page 58 for the location of the Serial ATA
connector.
For Serial ATA HDDs with a 4-pin power
connector:
3. Connect a 4-pin (female) power plug from
the power supply unit (PSU) to the 4-pin
(male) power connector at the back of the
drive.
For Serial ATA HDDs without a 4-pin power
connector:
Use the supplied SATA power cable. Connect
a 4-pin plug (female) from the PSU to the 4-
pin (male) plug of the SATA power cable.
Connect the 15-pin SATA power plug to the
power connector at the back of the drive
7-Pin SATA Cable