CyberResearch
®
Displays
C
Y
RAQ
®
24J Series
3
N
OTE
: If the screen remains blank or displays the error message “Out of
Range” or “No Input Signal,” there may be a connection or signal
problem. One or a combination of the possibilities listed below may be
the cause:
¾
Windows resolution is set either too high or two low for the display;
check the resolution by reinstalling the old monitor
¾
The refresh rate may be set too high. The refresh rate of an LCD
monitor doesn’t need to be set as high as a CRTs refresh rate; set the
refresh rate @ 60Hz.
¾
The power source isn’t connected correctly.
¾
The video cables aren’t tightly connected at one or both ends;
reconnect and tighten the cable adapter screws.
¾
The display is reading an input without a connected source; push Input
Select button to access the correct input.
¾
The unit is malfunctioning.
CyberResearch, Inc
.
19
25 Business Park Drive
P: (203) 643-5000; F: (203) 643-5001
Branford, CT USA
www.cyberresearch.com