CyberResearch CyRAQ 24J Series, User Manual, Page: 24 / 58

C
Y
RAQ
®
24J Series
CyberResearch
®
Displays
1. Ensure the cutout meets the suggested dimensions: 597mm (23.5
"
) W x 422mm (16.6
")
H for standard installation (see
Figure 5
).
2. Install
C
Y
RAQ
®
in panel cut out. Ensure all studs clear cutout opening and Poron
™
gasket on the rear of the unit is flush against panel (critical for NEMA compliance).
3
N
OTE
: Steps 3 & 4 require a second person
3. Align studs on the C
Y
RAQ with the holes in mounting plate from rear of panel (as seen
in
Figure 5
).
Important!
Do not exceed 30 in/lbs when tightening mounting nuts.
4. Also from rear of the panel, second person must install and tighten the eighteen 10-32
mounting nuts.
14 © Copyright 2011 CyberResearch, Inc