CyberPower OP1250 User Manual Download Page 17

OP850/1250 

Guaranteed Uninterruptible Power System 

 

 
 

properly installed, grounded and code-compliant 120 volt power lines in the United States 
and Canada; transients, surges or spikes on standard telephone land lines, PBX telephone 
equipment lines or ethernet lines, when properly installed and connected.. 

3. Damage from any circumstance described as excluded above with respect to the 
product. 
4. Damages from fire, flood, wind, rain, rising water, leakage or breakage of plumbing, 
abuse, misuse or alteration of either the product or the Connected Equipment. 

 
Exclusion of Consequential and Other Damages. 

The sole and exclusive remedies of the Initial Customer are those provided by the Limited 
Warranty and Power Control Guarantee. CyberPower excludes any liability for personal 
injury under the Limited Warranty and Power Control Guarantee. CyberPower excludes any 
liability for direct, indirect, special, incidental or consequential damages, whether for 
damage to or loss of property [EXCEPT FOR (AND ONLY FOR) the specific limited 
agreement of CYBERPOWER to provide certain warranty benefits regarding "Connected 
Equipment" under the "CYBERPOWER Power Control Guarantee"], loss of profits, 
business interruption, loss of information or data. This exclusion applies even though 
damage or loss is caused by negligence or other fault. NOTE: Some States or Provinces do 
not allow the exclusion or limitation of incidental or consequential damages, so the above 
limitation may not apply to you. 

 
DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT OR OTHER HIGH RISK 
ACTIVITIES. 

CyberPower does not sell the Products for use in high-risk activities. The Product is not 
designed or intended for use in hazardous environments requiring fail-safe performance, 
including the operation of nuclear facilities, aircraft navigation or communication systems, 
air traffic control, weapons systems, life support or medical applications or for use in any 
circumstance in which the failure of the Product could lead directly to death, personal injury, 
or severe physical or property damage, or that would affect operation or safety of any 
medical or life support device (collectively, "High Risk Activities"). CyberPower expressly 
disclaims any express or implied warranty of fitness for purpose for High Risk Activities. 
CyberPower does not authorize use of any of its products in any High Risk Activity. 

ANY 

SUCH USE IS IMPROPER AND IS A MISUSE OF A CYBERPOWER PRODUCT

 

The Limited Warranty and the Power Control Guarantee are governed by the laws of the 
United States and the State of Minnesota, without reference to conflict of law principles. The   
application of the United Nations Convention of Contracts for the International Sale of 
Goods is expressly excluded. 
 

Contact Information: CyberPower's address is 5555 12th Ave East, Suite 110, Shakopee, 
MN 55379 and its phone number is (952) 403-9500 

or (877) 297-6937 (toll free)

.  

CyberPower is the warrantor under this Limited Warranty. You may also contact 
CyberPower on the Internet at 

www.cyberpowersystems.com

 
 
 
 
 
 
 
 
 
 
 
 
 
 

13 

Summary of Contents for OP1250



















Reviews: