Copyright © 2017 CyberPower Systems, Inc.
BASIC OPERATION
12
PDU / HW PDU FRONT/REAR PANEL DESCRIPTION
OL6K6UPDU
OL8K10K6UPDU
OL6K3UPDUHW
OL8K10K3UPDUHW
1. Input Circuit Breaker
Provides input overload and fault protection.
2. Manual Bypass Switch
Provide UPS output to connected equipment when turned to Normal.
Provide utility power to connected equipment when turned to Bypass.
3. Input / Output Terminal Block
Connect to utility power / your equipment.
4. Interlock Bracket
Avoid turning the
“
Manual Bypass Switch
“
under normal operation.
5. Inspection Window
Visual check the wiring condition and secure the terminal.
6. Input / Output Connectors
Use these connectors to attach the PDU or HW PDU to the Power
module.
7. Connectors Cover
Provides safety protection when removing the PDU or HW PDU.
8. Output Circuit Breaker
Provides output overload and fault protection.
9. Battery Backup & Surge Protected Outlets
Provides battery backup and surge protection. They ensure power is
provided to connected equipment over a period of time during a power
failure.
Critical / Noncritical Load
Allows the creation of load priorities to ensure that battery power
reserves are transferred to specified outlets during a power outage. The
unit can be programmed to provide additional runtime for equipment
connected to the “CRITICAL” outlets, while stopping the power supply to
equipment connected to “NONCRITICAL” outlets after a designated
period of time.
