CyberPower CPSHB300ETR User Manual Download Page 20

   

 
 
 
 
 

6)

 

Plug in load to inverter standalone output, inverter will feed-in  the residual power to Grid to 
balance the power consumption of load (If the residual power is more than load, inverter would 
reduce the input power to make the net power to Grid as zero). 

 

6.2 Operation Modes 

Self-consumption (On-Grid) Mode 

In this mode, the inverter convers PV power to charging battery and/or to balance the load power 
consumption; Whenever the DC voltage is lower than 25Vdc, the inverter will work in waiting state and 
attempt to connect the grid  by  5mins  for <25Vdc and  30s  for <16Vdc.  In waiting state the inverter 
continuously monitors the internal system. Grid bypasses power to load directly. 
Note: The inverter starts up automatically when DC power from the PV panel is sufficient. 
 

Off Grid Mode 

In this mode, whenever the PV  or Battery has sufficient power, the inverter convers PV and/or battery 
power to loads when Grid power is no available. 

 
Fault Mode 

The internal intelligent controller can continuously monitor and adjust the system state. If inverter finds 
any fault conditions, inverter would shutdown immediately 

 

Bypass Mode 

When no PV power  during On Grid operation, inverter off internal switch but keep bypass relay on to 
continuously supply loads power from Grid directly. 
 

Charger Mode 

If user doesn’t want On-Grid, bypass or Off-Grid operation, wants all PV power to charge battery. Either one 
of below ways can make inverter stay in charger mode. 

-

 

Disconnect Grid O/P and Standalone, power on PV power. 

-

 

Press and hold button for 3s during operation (inverter would back to On-Grid operation after PV 
power off and on) if Grid is available. 

 
Sleeping Mode 

User can off inverter by press and hold the button for 3s during inverter operation. In this mode, inverter 
off all LEDs to save energy but keep monitoring the internal system for quickly going back to normal 
operation. When PV power comes back, inverter will enter charger mode automatically. When PV power is 
gone, inverter will enter shutdown mode. 

 

 

 

PV >27V and <50V 

 

 

User Manual                                       

14                                   Hybrid CPSHB300ETR   

Summary of Contents for CPSHB300ETR





































Reviews: