CyberPower CPS1500PIE User Manual Download Page 13

CPS1500PIE 

 

Copyright ©  2014 CyberPower Systems, Inc.

 

 

12 

CAUTION!

   

The following statements related to the battery warranty are highly important. Please 

read and abide by them carefully. 

 

Do not set the inappropriate battery capacity. Incorrect charging current will seriously affect the 

cycle use of the battery. 

 

Use LOWEST/LOW current level for setting if the flooded battery is used. 

 

Assess if the battery can withstand the charging current before you adjust the original current 

level to a larger one. Unsuitable use will seriously impact on the battery lifespan. 

The battery warranty becomes not applicable when one of the rules is violated. For more information, 

please contact the local agent. 

 

  Please set the correct battery capacity.   

Please set the correct charging current, especially for   

   

FLOODED BATTERY

.

 

 

CAUTION!

   

Too large charging current, overcharge and that the battery is not fully charged for a long 

time all have impact on the lifespan of the battery. Please carefully assess the battery type, capacity, 

charging current and discharging and charging time needed. 

For more information, please contact the 

local agent.

 

 

CAUTION!

   

BATTERY LIFESPAN

 will be influenced by several factors, such as the number of 

discharging and recharging cycles and the ambient temperature. It is recommended to follow the 

suggestions below to increase the lifespan of the battery. 

 

Setting too large charging current will decrease the battery lifespan. Please choose the suitable 

setting from the table on page 11 to meet your needs. 

 

Keep the battery fully charged, even when it is not in use. 

 

Do not expose the battery to high temperature environment, such as direct sunlight. It will 

seriously decrease the efficiency of the battery.   

 

The lifespan of the battery gets a drop-off when the ambient temperature is getting higher above 

77

/

25

, which is the optimum temperature for the battery

. Keep the ambient temperature at 

the optimum temperature. 

 

Do not deploy batteries with different manufacturing batch (different production date). Mix usage 

of  batteries  with  different  remaining  power  (voltage)  will  cause  unbalanced  charge  voltage  and 

will shorten the lifespan of batteries. 

 

The voltage differences of one set of batteries shall be within 0.3V. If not, change the unsuitable 

batteries in order not to cause unbalanced charge. It will shorten the lifespan of batteries. 

Summary of Contents for CPS1500PIE




















Reviews: