Step 3:
Fasten the battery bracket and then insert the connectors. Place the connectors in the
bracket.
.
Step 4:
T
ighten the screws of the battery bracket and front panel .
Step 5:
Repeat from step1 to step4 to replace the other side batteries pack.
CONNECTION : POWER MODULE(UPS) WITH BATTERY MODULE
CONNECTION 1 : POWER MODULE(UPS) WITH ONE BATTERIES MODULE
Step 1: Loosen the two screws to remove the battery cable retention bracket of the Power
module and Batteries module.
Step 2: Use the battery cable to connect the Batteries module to the Power module.
Step 3: Rotate the battery cable retention bracket and tighten the two screws to fix battery cable
on the Power module and Batteries module.
CONNECTION 2 : POWER MODULE(UPS) WITH MULTIPLE BATTERY MODULES
Step 1: Connect the 1
st
Batteries module to the Power module using battery cable. (Refer to
above steps of connection #1)
Step 2: Loosen the two screws to remove the battery cable retention bracket of the 1
st
batteries
module and 2nd Battery module.
Step 3: Use the battery cable to connect the 2
nd
Batteries module to the 1
st
Batteries module.
Step 4: Rotate the battery cable retention bracket and tighten the two screws to fix battery cable
on 1st batteries module and 2nd Batteries module.