2)
Attach the rackmount rail to your rack with two M5X12L screws and two plastic washers at
the front of the rack. (Located in position 1 & position 6) Do not tighten the screws. Adjust
the rail size on the rail assembly of your rack. Secure the rail to the rear of the rack with two
M5X12L screws and two plastic washers. Tighten all screws at the front and rear of the rail.
Once completed, perform the same steps for assembling the other rackmount rail.
Step 3: Install the batteries module on the rack
Place the batteries module on a flat stable surface with the front of the unit facing toward
you. Secure the batteries module to your rack with four M5X12L screws at the front of the
rack. (Located in position 2 & position 5)