6
Step2.
Rackmount rails Installation
a) The rails adjust to mount in 48-cm
(19-inch) panel racks from 52 to 91.5cm
(20.5 to 36 inches) deep. Select the
proper holes in the rack for positioning
the UPS in the rack. The UPS takes up
position 1 through position 9.
b) Attach the rackmount rail to your rack
with two M5X12L screws and two plastic
washers at the front of the rack.
(Located in position 1 & position 6) Do
not tighten the screws. Adjust the rail
size on the rail assembly of your rack.
Secure the rail to the rear of the rack
with two M5X12L screws and two plastic
washers. Tighten all screws at the front and rear of the rail. Once completed,
perform the same steps for assembling the other rackmount rail.
