Cybernet iOne-G4 User Guide
Page 17
Installing the CPU Heat Sink
1. Put on the heat sink and make sure that the
four screws fit the corresponding screw holes
on the motherboard.
2. Alternate pressure while securing the four
screws with balance.
Note:
Do not fix any screws until the four
screws are in their positions.
3. Secure the two screws at the opposite end
near the top edge of the bezel.
4. Connect the power cable to CPU Fan on the
motherboard
labeled FAN 1 CPU FAN.
Summary of Contents for iOne-G4 Series
