CONNECTING
THE DEVICE
TECHNICAL MANUAL
Connecting the hi-Res800_PC to a VGA source
Before attempting to connect the headset it is important to make sure that the PC is
switched off
.
You can connect the hi-Res800_PC to any desktop PC, laptop computer or other
VGA source. Before doing so, make sure your VGA source is set for 800 x 600
resolution output at 60Hz. The hi-Res800_PC cable is an integrated VGA / Audio /
Power cable. See Figure 1.
Figure 1.
1. Connect the VGA plug on the hi-Res800_PC cable to the VGA output port
on your computer.
2. Connect the power supply plug on the hi-Res800_PC cable to the power
supply cube. Plug the power cube into an AC electrical socket.
3. Connect the audio plug on the hi-Res800_PC cable to the audio output
source on your computer
4. If the headset has been integrated with a tracking device it will need to be
connected to the tracker card/serial device input or USB port - for further
information on this connection please refer to the supplied tracker
documentation.
5.
Switch on your PC
6.
Follow the instructions relating to the usage of the device.
7
