background image

USER PREFERENCES

SPDIF / RAW:

Digital Coding of one to six channels (5 plus 1) in a bitstream

(Dolby Digital). If you would like to enjoy the effect of DVD 5.1, please select
SPDIF / RAW. Generally, this setting is used with receivers capable of Dolby
Digital 5.1 channel decoding.

SPDIF / PCM:

PCM (Pulse Code Modulation). The description of the PCM

sound of DVDs corresponds to the CD system, but with a higher reading rate
(48 kHz, 96 kHz also possible). Alternatively, audio for most films is stored as
discrete, multi-channel surround sound using Dolby Digital audio compression
similar to the digital surround sound formats used in theatres. Generally, this
setting is reserved for two channel equipments.

Dual mono

Use this setting when playing CDs and VCDs that offer only Mono audio tracks.
There are the following setup possibilities:

Stereo:

Sets the stereo signal.

Mono left:

There will only be output of the left signal on the left and right loud-

speaker.

Mono right:

There will only be output of the right signal on the left and right

loudspeaker.

Mono mixed:

The left and right signal will be mixed  and put out mixed on the

left and right loudspeaker.

Language

Video

Audio

Security

General

Audio setup page

Downmix

STR

Stereo

SPDIF output

RAW

Mono left

Dual mono

STR

Mono right

Dynamic

Mono mixed

Dual mono setup 

45

Dynamic

In this menu you can set the Dynamic Range. This option is sometimes called
“midnight mode”. The Dynamic Range Control aims to make watching a movie
at low volumes more enjoyable by booting the quieter sounds while suppress-
ing the louder sounds. Use the buttons 

C

” 

or

D

to adjust this mode from

“Off”

to 

“Full”

.

Changing the security settings

Highlight the menu point you would like to set in the 

“Security”

menu. Please

press 

“ENTER”

or the right direction button to enter a menu. Use the button

C

”or “

D

” to select the required setting and press 

“ENTER”

to confirm your

selection. You can leave the menu at any time by pressing the button 

B

on

your remote control.

Note: 

You must completely stop the player by pressing the Stop button twice to

change the security settings.

Language

Video

Audio

Security

General

Audio setup page

Downmix

STR

Full 

SPDIF output

RAW

Dual mono

STR

3/4

Dynamic

1/2

1/4

Off

Dynamic range control

Language

Video

Audio

Security

General

Security setup page

Change PSW
Parental

8

Go to security setup page

ENG

Summary of Contents for CH-DVD 452





















































Reviews: