manualshive.com logo in svg

CyberHome CH-DVD 452, Operation Manual

Share
Download
CyberHome CH-DVD 452 Operation Manual Download Page 20

21

Video connection to a TV / Beamer with Component
Video inputs (YCbCr / YPbPr)

Component video separates the video signal into three separate “components”,
resulting in a higher picture quality than S-Video or standard composite video.
In order to use component video, you have to use a TV/Beamer equipped with
component video inputs.

You will also need a component/P-Scan video cable (not included) with sepa-
rate connectors for Y, Cb/Pb and Cr/Pr signals. This type of cable also supports
the Progressive Scan mode when used with high-end P-Scan TVs. Using the
component video output or P-Scan mode requires the following steps:

1. Preparation:

- First, use an audio/video cable or S-Video cable to connect the DVD play-

er to the composite video or S-Video input on your TV/beamer. 

- As this device has a fixed power cord, only plug the other end of the fixed

power cord into the wall socket. 

- Turn on the TV/beamer and the DVD player and select the corresponding

video input on your TV/beamer.

2. Entering the setup menu to change the Video setting:

Enter the player’s setup menu by pressing the 

“SETUP”

button on the

remote control. Use the direction button 

“

A

” 

to navigate to the “Video” setup

page, then press 

“ENTER”

navigate down to the “Video output” menu and

press 

“ENTER”

to enter the menu. Use the direction button 

“

D

”

to proceed down to the 

“YUV”

setting and press 

“ENTER”

to confirm

your selection. On the screen will now be displayed a warning hint. Follow
the instructions on the screen.

3. Connecting the player using the Component Video cable: 

Unplug the Composite Video or S-Video cable and connect the Component
Video cable to the appropriate jacks on your TV/Beamer. Normally, cables
and jacks are color-coded to make the connection easier. Then adjust the
TV’s/Beamer’s video input setting to correspond to the component video
input.

AUDIO AND VIDEO CONNECTIONS

COMPONENT VIDEO CABLE

TV or

Beamer

COMPONENT

VIDEO INPUT

���

ENG

Language

Video

Audio

Security

General

Video settings

TV shape

Wide

S-Video

TV system

PAL

YUV

Video output

S-Vi

RGB

Video mode
Sharpness

Mid

Brightness

00

Contrast

00

Set the video output

4. Using a Progressive Scan TV: 

To switch from Interlace to Progressive

Scan, please read section 

“Video mode”

on page 43.

Summary of Contents for CH-DVD 452





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands